logo

Infant Formula Base Powder Spray Drying Line: Hygienic Design, Stable Particle Size, Low Heat Damage

2026/11/05
Latest company blog about Infant Formula Base Powder Spray Drying Line: Hygienic Design, Stable Particle Size, Low Heat Damage
Where Infant Formula Powder Is Won or Lost

Infant formula base powder is the most demanding dairy powder a dryer will ever handle. The protein fraction is heat-sensitive, the whey protein to casein ratio has to be held tightly around 60:40, and every batch is judged on particle size distribution, dispersibility and microbiological cleanliness rather than on output alone. A dryer that performs well on whole milk powder will not automatically clear those bars.

Our two-stage spray drying line is configured around those constraints: the chamber does the evaporation, the vibrating fluid bed finishes drying and cooling gently, and hygiene is designed into the powder path instead of being added afterwards.

Reference Process Parameters

The ranges below are our working baseline for base powder and follow-on formula. Final set-points are fixed after a concentrate trial, because heat treatment history and solid content both shift the heat load the powder can absorb.

ParameterReference RangeWhy It Matters
Feed solid content45–52%Higher solids cut energy demand and bulk density variation
Inlet air temperature180–205 °CDrives evaporation without raising particle temperature
Outlet air temperature85–95 °CControls moisture and limits lysine loss
Final powder moisture≤ 3%Required for shelf stability and flowability
Particle sizeTuned by atomisation and agglomerationGoverns dispersibility in the bottle
Second-stage dryingVibrating fluid bed, 2–3 zonesGentle finishing plus cooling before packing
System Configuration
  • Air handling: HEPA-filtered inlet air with indirect heating, so combustion products never contact the product.
  • Drying chamber: wide-body conical chamber with tuned air disperser to limit wall residence time.
  • Atomisation: high-pressure nozzle or rotary atomiser matched to target particle size and agglomeration strategy.
  • Lecithination: optional inline lecithin dosing for instant-dissolving grades.
  • Powder recovery: cyclone plus bag filter, closed conveying to sifter and packing.
  • Cleaning: automatic CIP with documented coverage of chamber, ducting and fluid bed.
  • Control: PLC with batch recipe control, alarm history, trend logging and traceability export.
Hygiene and Compliance Design Points
RequirementEngineering Response
Food-contact surfacesSS316L contact parts, polished welds, no dead corners
Microbiological controlClosed powder path, filtered air, validated CIP cycle
Batch traceabilityRecipe-based PLC records with timestamped parameters
Changeover between gradesStored recipes plus documented cleaning verification
Operator safetyInterlocked access, temperature and pressure safeguards
Built by a Manufacturer, Not a Trading Desk

YiSheng Drying has been building industrial drying systems in Changzhou for more than 40 years, with over 400 customers served and 60–70% of output exported. That matters on a formula project: chamber geometry, air disperser design and fluid bed layout are engineered and fabricated in-house, so process adjustments requested during commissioning can be made on the machine rather than negotiated through a third party.

Trials, Delivery and Commissioning

Projects normally start with a concentrate sample trial to measure recovery, bulk density and dispersibility. Delivery then covers layout drawings, utility schedule, FAT before shipment, installation guidance, operator training and a documented performance run against agreed capacity, moisture and particle size targets. Spare parts for nozzles, filter bags and seals are stocked to keep seasonal production uninterrupted.

Next Step

Send us your target capacity in kg/h, formula type (stage 1, follow-on or specialty), feed solid content and required particle size, and we will return a sized two-stage drying line with utility consumption, footprint and delivery schedule.

Related reading: our news and technical articles cover milk powder drying parameters and whey powder caking control in more detail.