Milk powder production depends on one critical step: removing water from concentrated milk fast enough to protect protein structure, colour and flavour. Spray drying meets this requirement by atomising the concentrate into fine droplets that meet hot air in a single pass, so evaporation happens in seconds while the droplet temperature stays low. The result is a free-flowing powder with excellent solubility, long shelf life and consistent bulk density.
This solution is designed for dairy processors who need a predictable, repeatable drying curve rather than an oversized dryer running below capacity.
The drying curve below is the reference baseline for whole milk and skim milk powder. Final set-points are confirmed after a feed sample test, because solid content and fat level directly change the required evaporation rate.
| Parameter | Reference Range | Impact on Quality |
|---|---|---|
| Feed solid content | 40–50% | Higher solids reduce energy per kg of powder |
| Inlet air temperature | 180–220 °C | Drives evaporation rate and throughput |
| Outlet air temperature | 80–95 °C | Controls final moisture and protein safety |
| Final powder moisture | ≤ 3–5% | Directly linked to shelf life and caking risk |
| Atomisation speed | Rotary or nozzle, adjustable | Sets particle size and dispersion behaviour |
| Residence time | 5–30 seconds | Short contact protects heat-sensitive protein |
Each line is configured as a complete, integrated system rather than a stand-alone dryer, so the powder path stays closed from concentrate tank to packing:
- Feed section: high-pressure pump or peristaltic pump with flow control and inline filtration.
- Atomisation unit: rotary disc atomiser for uniform droplet size, or pressure nozzle for high-solid feeds.
- Drying chamber: conical bottom design to prevent wall build-up and reduce cleaning downtime.
- Powder recovery: cyclone separator plus bag filter to lift total recovery above 99%.
- Air system: filtered inlet air, direct or indirect heater, and optional heat recovery on exhaust.
- Control system: PLC with touch-screen HMI, recipe storage, alarm logging and temperature trending.
| Design Point | Benefit in Production |
|---|---|
| Precise outlet temperature control | Consistent moisture batch after batch, fewer reject lots |
| High-efficiency atomisation | Uniform particle size, better solubility and dispersion |
| Closed powder handling | Reduced product loss and cleaner working environment |
| Food-grade construction | SS304/SS316L contact parts, polished welds, CIP-ready surfaces |
| Modular capacity range | Small pilot unit for trials through to continuous production lines |
The same platform handles skim milk powder, whole milk powder, whey powder, cream powder and base powder for infant formula, as well as dairy-alternative and plant-protein powders. Because atomisation and air flow are independently adjustable, switching between recipes is a matter of loading a stored program rather than rebuilding the machine.
Delivery includes layout drawing, utility requirements, installation guidance, operator training and a documented commissioning run to prove capacity and moisture targets. Spare parts for nozzles, filter bags and seals are kept available so maintenance does not become a bottleneck during peak season.
Send us your target capacity in kg/h, feed solid content and required final moisture, and we will return a sized spray drying line with utility consumption, footprint and delivery schedule. Pilot-scale trials can be arranged before you commit to a full production unit.