100kg/H – 1000kg/H Automatic Flash Dryer 5000 – 12500m3/H Industrial Flash Dryer
Key Attributes
Product Summary
XSG-10 Automatic Flash Dryer is built for large continuous runs, evaporating 100-1000 kg/h with a 1000 mm barrel and 5000-12500 m3/h airflow. The 1100 x 5000 mm chamber and 15-30 kW drive hold temperature steady through long shifts in chemical, food and pharmaceutical plants.
Applicable Materials
100kg/h automatic flash dryer
,1000kg/h automatic flash dryer
,12500m3/ industrial flash dryer
Key Applications
- High-viscosity chemical compounds
- Industrial slurry materials
- Crystallization products
- Mud and slag residues
- Filter cake drying
Technical Parameters
| Type | Barrel diameter(mm) | Main machine dimensions(mm) | Main machine power(kw) | Air volume(m³/h) | water evaporation capacity (kg/h) | occupied area (mm²) |
|---|---|---|---|---|---|---|
| XSG-2 | 200 | 250×2800 | 0.75–2.2 | 300–800 | 10–20 | 3500×2500 |
| XSG-3 | 300 | 400×3300 | 3–4 | 600–1500 | 20–50 | 3800×2700 |
| XSG-4 | 400 | 500×3500 | 4–7.5 | 1250–2500 | 25–70 | 4000×3000 |
| XSG-5 | 500 | 600×4000 | 5.5–11 | 1500–4000 | 30–100 | 4200×3200 |
| XSG-6 | 600 | 700×4200 | 7.5–18.5 | 2500–5000 | 40–200 | 4250×3250 |
| XSG-8 | 800 | 900×4600 | 11–18.5 | 3000–8000 | 60–600 | 4500×3500 |
| XSG-10 | 1000 | 1100×5000 | 15–30 | 5000–12500 | 100–1000 | 4750×3750 |
| XSG-12 | 1200 | 1300×5200 | 15–37 | 10000–20000 | 150–1300 | 5000×4000 |
| XSG-14 | 1400 | 1500×5400 | 30–55 | 14000–27000 | 200–1600 | 5250×4250 |
| XSG-16 | 1600 | 1700×6000 | 45–75 | 18700–36000 | 250–2000 | 5500×4500 |
Operating Principle
- Cold air passes through an air filter and is directed by a blower to the air heater
- Heated air enters the drying tower at appropriate velocity from the bottom
- Wet material is fed into the drying tower via screw feeder
- Strong shear forces, blowing, floating, and rotating actions occur
- Material crushing takes place through external mechanical force
- Heated air transfers thermal energy to wet material components
- Moisture absorption and evaporation phenomena occur
- Air carrying evaporated moisture moves to cyclone separator and pulse bag filter
- Air separation process completes the drying cycle
Working Principle
The mixture is separated in the cyclone, the fines go to the bag filter, and the dry product is discharged while the exhaust fan maintains the negative pressure that keeps the circuit closed. Because the material is dispersed as individual particles rather than as a bed, the heat and mass transfer surface is very large and drying is essentially instantaneous, which is why the process suits heat-sensitive products. In this configuration the unit is supplied with an air volume of 5000–12500 m³/h, a water evaporation capacity of 100–1000kg/h, a 15–30 kW drive and an overall size of 1100×5000 mm.
The rotor breaks the material into fine particles and throws them into the gas stream, so the surface moisture flashes off in a fraction of a second and the product leaves as a dry powder. Residence time in the riser is only a few seconds. The feed is thrown against the hot gas by a rotary disperser, coarse particles are returned for another pass by the classification ring, and only sufficiently dry particles leave with the exhaust.
Structure & Key Components
The feed system is a screw pump for slurry or a variable-speed screw feeder for cake. Air handling includes the supply fan, air heater, and ducting; product recovery uses a cyclone followed by a pulse-jet bag filter, and the whole circuit runs under negative pressure controlled by a damper or a VFD. The main body is a vertical cylinder with a conical bottom, an air distributor at the inlet and a classification ring at the top.
Instrumentation covers inlet and outlet temperature, fan current and chamber pressure. The chamber and ducting are accessible through hinged covers, and wear protection is applied at the points where the particle-laden stream changes direction. Control philosophy is matched to how the operator actually runs the line.
Advantages
Footprint is small relative to evaporative capacity, and the closed negative-pressure circuit keeps dust inside the system, which matters for toxic or dusty products. The same unit dries, disperses and classifies, which removes the need for a separate mill and gives a narrow particle size distribution with a high degree of automation. Turn-down is achieved through the feed rate and the inlet temperature, so one machine can cover a family of products without mechanical changes. Drying is completed in seconds, so the product is exposed to heat only briefly and colour, activity and solubility are preserved even at relatively high inlet temperatures.
Applicable Materials & Industries
The process suits materials that are pumpable or plastic at the inlet and free-flowing at the outlet, especially where the product must not be overheated. In the food and feed sector the dryer handles protein hydrolysates, fermentation residues and vegetable pulp, and in minerals it is used for clay and pigment drying. Because the classifier controls the outlet size, the same dryer serves both fine pigment grades and coarser agricultural products. Typical feeds are filter cake, paste and slurry from chemical synthesis, together with starch, calcium carbonate, kaolin, pesticide intermediates and dye stuffs. Mechanical detail follows the abrasiveness and bulk density of the product.
Warranty & Service
Every Yisheng Drying machine is delivered with a 12-month warranty and lifetime after-sales service. Installation guidance, remote technical support and on-site engineering are available worldwide.
- 12 months warranty with lifetime after-sales service.
- Installation guide included with every shipment.
- Remote technical support by phone, video call and e-mail, around the clock.
- Engineers available to service machinery overseas.
Layout Confirmation
Upon contract effectiveness, equipment layout can be customized according to the customer's workshop conditions. The finalized layout is released for production only after signed confirmation by the customer's authorized representative.
Installation & Commissioning
Upon equipment arrival at site, Yisheng Drying can dispatch experienced engineers for paid on-site installation guidance. After mechanical erection, our engineers conduct hands-on training for the buyer's site operators, maintenance technicians and process engineers.
- Service fee: USD 100 per technician per day.
- The customer arranges and covers the technicians' accommodation, airfare and meals.
- The customer ensures the personal safety and security of dispatched personnel during their stay on site.
Technical Training
Free technical training can be arranged at our factory workshop. On-site hands-on training for operators and maintenance staff is provided during commissioning.
Maintenance & Warranty
In case of equipment failure during operation, our service engineers arrange free online support 24/7. During the warranty period, all quality-related repair parts and site service are borne by our company.
Technical Documentation Deliverables
- Drawings: process flow diagram, general layout and elevation drawing, electrical schematic drawing.
- Manual documents: operation and maintenance manual, equipment list, material certification, OEM manuals and certificates for imported components.